Sheet Metal Houston

HVAC Duct
Sheet Metal - Houston


HVAC

Heating and Ventilation

HVAC Sheet Metal Duct Work

Industrial Ventilation

  • Exhaust fans
  • Heat removal
  • Air circulation
  • Laundry exhaust
  • Make up air systems
  • Product conveying systems
  • Dust collectors
  • Cyclones
  • Autoclaves
  • Fume extractors
  • Furnace flues

HVAC Sheet Metal Fabrication

Sheet metal workers make, install, and maintain heating, ventilation, and air conditioning duct systems; roofs; siding; rain gutters; downspouts; skylights; restaurant equipment; outdoor signs; railroad cars; tailgates; customized precision equipment; and many other products made from metal sheets. They also may work with fiberglass and plastic materials. Although some workers specialize in fabrication, installation, or maintenance, most do all three jobs. Sheet metal workers do both construction-related work and mass production of sheet metal products in manufacturing.

Sheet metal workers first study plans and specifications to determine the kind and quantity of materials they will need. They then measure, cut, bend, shape, and fasten pieces of sheet metal to make ductwork, countertops, and other custom products. In an increasing number of shops, sheet metal workers use computerized metalworking equipment. This enables them to perform their tasks more quickly and to experiment with different layouts to find the one that wastes the least material. They cut, drill, and form parts with computer-controlled saws, lasers, shears, and presses.

In shops without computerized equipment, and for products that cannot be made on such equipment, sheet metal workers make the required calculations and use tapes, rulers, and other measuring devices for layout work. They then cut or stamp the parts on machine tools.

Before assembling pieces, sheet metal workers check each part for accuracy using measuring instruments such as calipers and micrometers and, if necessary, finish pieces using hand, rotary, or squaring shears and hacksaws. After inspecting the pieces, workers fasten seams and joints together with welds, bolts, cement, rivets, solder, specially formed sheet metal drive clips, or other connecting devices. They then take the parts to the construction site, where they further assemble the pieces as they install them. These workers install ducts, pipes, and tubes by joining them end to end and hanging them with metal hangers secured to a ceiling or a wall. They also use shears, hammers, punches, and drills to make parts at the worksite or to alter parts made in the shop.

Some jobs are done completely at the jobsite. When installing a metal roof, for example, sheet metal workers usually measure and cut the roofing panels on site. They secure the first panel in place and interlock and fasten the grooved edge of the next panel into the grooved edge of the first. Then, they nail or weld the free edge of the panel to the structure. This two-step process is repeated for each additional panel. Finally, the workers fasten machine-made molding at joints, along corners, and around windows and doors for a neat, finished effect.

In addition to installation, some sheet metal workers specialize in testing, balancing, adjusting, and servicing existing air conditioning and ventilation systems to make sure they are functioning properly and to improve their energy efficiency. Properly installed duct systems are a key component to heating, ventilation, and air conditioning (HVAC) systems; sometimes duct installers are called HVAC technicians. A growing activity for sheet metal workers is building commissioning, which is a complete mechanical inspection of a building's HVAC, water, and lighting systems.